PG 8582 CD [WW AD CM]
Washer-disinfector with liquid dispensing, hot air drying DryPlus & conductivity monitoring.

Price:

Save & Compare

PG8582 CD [WW AD CM]

More product information

Washer-disinfector with liquid dispensing, hot air drying DryPlus & conductivity monitoring.

Performance/cycle, e.g. 8 DIN mesh trays or 1-2 MIS sets
Further loading options
Alternatively, 42 GYN specula or 2–3 AN sets can be reprocessed per cycle.
Safety – Wash pressure, spray arm and conductivity monitoring
For a reliable result
Outstanding preparation results are achieved because the jet pressure and spray arms are monitored continuously and a decline in jet pressure or load blockage is detected immediately In addition, any deviations from the prescribed conductivity of the water, particularly in the final rinse, are detected.
68 % less water consumption compared to predecessor model^*compared to VarioTD programme for G 7892
Save water with flawless results
The variable-speed heater pump adjusts its speeds and thus the wash pressure in line with the relevant requirements in the programme blocks – high pressure facilitates the removal of stubborn soiling, while low pressure guarantees the complete soaking of all the load items. As a result, the consumption of water and energy remains particularly low with optimum wash pressure at all times. Outstanding results while ensuring sustainable use of resources.
Efficient hot air drying - DryPlus
Efficient drying
Hot air drying DryPlus is the optimum solution for hollow instruments or narrow-lumened laboratory glassware. The upstream H14 HEPA filter ensures optimum particle separation from the drying air. The filter is easily accessible via a side unit.
Total security - link to process documentation possible
End-to-end documentation
The optional addition of a module for process documentation is provided via a communication slot. The Ethernet module is used for documentation via software. The RS 232 module must be used for documentation within a USB solution or via a printer.

EAN: 4002515631133 / Article no. 62858250ZA / Mat. no. 10224890

Product details - PG 8582 CD [WW AD CM]

Construction type and version
Construction type	Freestanding, can be built-under, wide, without lid Note Factory default without appliance cover: if required, the lid is available separately (for conversion to a freestanding appliance).
Casing	Stainless steel
Can be built-under	• Can be built under a worktop The machine can be easily integrated under a worktop.
AutoClose – automatic door lock	• AutoClose^* A light touch is all it takes: With AutoClose, the door closes by itself. Patent: EP 1 733 675 B1
Buzzer, acoustic signal at end of programme	•
Service-friendly design	• Easy-to-service construction Short service times thanks to maintenance-optimised appliance design.
Application
Suitable for hospitals	• Perfect for hospitals These washer-disinfectors meet the requirements of hospitals particularly well. Thanks to their powerful wash technology and variety of programmes, they achieve outstanding reprocessing results even with high cycle throughput rates. In addition, a variety of machine versions and components facilitate the perfect alignment to your needs on site.
Suitable for doctors’ surgeries	• Perfect for dental practices These washer-disinfectors meet the requirements of medical practices particularly well. With their compact design and powerful wash system, they offer short cycle times as well as programmes for numerous uses, so that all your instruments are quickly ready for re-use.
Suitable for outpatient surgeries	• Perfect for surgical practices These washer-disinfectors meet the requirements of surgical practices particularly well. Powerful wash technology and high capacity enable them to provide high throughput rates, even in the case of challenging special instruments.
Suitable for fire brigades and rescue services	• Perfect for fire and rescue services These washer-disinfectors meet the requirements of emergency services particularly well. With their high capacity and special loading options for respiratory masks and anaesthetic instruments, they are the perfect solution for reprocessing on site.
Capacity
DIN mesh trays per cycle [number]	8
GYN specula per cycle [number]	42
MIS sets per cycle [number]	1-2
AN sets per cycle [number]	2-3
Lumened instruments per cycle [number]	44
Performance data
Circulation pump, Qmax in l/min	500
Shortest programme running time (cleaning and disinfection) in min Drying Some machines have a drying option. This can be set individually depending on the reprocessing situation.	22
Maximum final rinse temperature in °C	93
Wash cabinet usable capacity in l	145
Tested operating hours Note Our machines undergo intensive testing under laboratory conditions. The actual operating hours may vary depending on actual usage behaviour, maintenance and care of the machine.	15000
Control system
Control type	TouchControl
Programme selection	Touch on MSetal Touch on Metal Greater user convenience and easy surface cleaning.
Direct-access pushbuttons	• Short cut buttons Quick and convenient access to frequently used programmes.
Max. delay start in h	24
Programmability	programmable
Programmes [number]	19
Free programme positions [number]	2
A0 value controls	• Intelligent A0-value controls As soon as the prescribed A0 value is reached, the disinfection phase comes to an end and the programme continues in the next phase. Due to this system the cycle time is reduced, in comparison to a time-controlled programme.
Automatic programme restart	• Programme failure protection Time-saving and safe: The programme failure protection facilitates the continuation of the cleaning and disinfection process after a short interruption, such as a power cut. If the success of the reprocessing process should be at risk, the appliance issues a corresponding warning message.
Time left display	•
Programme sequence display	•
Selectable display languages	• Adjustable display language No misunderstandings: The user can select his/her language of choice from a number of different options. All display notifications appear in this language, so that the highest level of operating safety is ensured.
Standard electrical connection
Electrical connection	3N AC 400V 50HZ
Electric heater rating in kW	8,5
Total rated load in kW	9,3
Fuse rating in A	16
Length of mains connection cable in m Note The length refers to the supply lead on the outside of the appliance.	1,8
Possible voltage variant 1 Note If the appliance can be converted to a different voltage option, additional possible values for electrical connection can be found here. The Miele service department can do this conversion for you for a fee.
Electrical connection	AC 230V 50HZ
Electric heater rating in kW	2,5
Total rated load in kW	3,3
Fuse rating in A	16
Water connection/drainage
Cold water [number]	1
Cold water for steam condenser [number]	1
Hot water [number] Efficient hot water connection Connection to the warm water supply saves a lot of time and energy.	1
DI water [number] DI water connection Thanks to the connection for fully demineralised water (DI water), these washer-disinfectors and thermal disinfectors facilitate optimum reprocessing results. Carrying out the final rinse with DI water also protects valuable wash items from deposits and corrosion.	1
Required flow pressure in kPa Note on ADP variants This value applies to cold, hot and DI water; however, it does not apply to DI water intake on ADP variants because these use a feed pump.	200-1000
Maximum delivery head for drain pump in cm	100
Integrated water softener	• Integrated water softener The integrated water softener ensures optimum cleaning effectiveness.
Maximum water hardness (cold water/hot water) in mmol/l	10,7
Drain pump [DN]	22
Water protection system Waterproof System (WPS) Protection against flooding: In the event of problems, the system stops water intake automatically.	Waterproof system
Drying unit
Integrated drying unit	• Drying unit Reliable reprocessing results achieved more quickly with hot air drying.
Fan in kW	0,3
Heater element in kW	2,2
Air throughput in m³/h	60
HEPA filter class	H14 Efficient hot air drying Efficient internal and external drying of the whole instrument using hot air filtered with a H14 HEPA filter.
HEPA filter filtration efficiency (in accordance with DIN EN 1822) in %	99,995
Dimensions and weight
External dimensions, net height in mm	820
External dimensions, net width in mm	900
External dimensions, net depth in mm	600
External dimensions, gross height in mm Note Including packaging	1095
External dimensions, gross width in mm Note Including packaging	1200
External dimensions, gross depth in mm Note Including packaging	800
Wash cabinet, usable height in mm	520
Wash cabinet, usable width in mm	530
Wash cabinet, depth of upper basket in mm	474
Wash cabinet, depth of lower basket in mm	520
Net weight in kg	98
Gross weight in kg Note Including packaging	133
Emissions data
Emission sound pressure level in the workplace Emissions - sound pressure at workplace The emission sound pressure level depends on the programme and is a value given to the noise created by the machine. Miele Professional appliances have very low noise levels.	<lt/>70 dB(A) re 20 µPa
Heat dissipation into the room in MJ/h Heat output into the room During operation warm air is vented into the surrounding room. The released amount of heat/time depends on the set temperatures and the intensity of use. The stated maximum value can be used to control the temperature of the area or to calculate an increase in room temperature.	1,45
Programmes
Vario TD Instr 4 mesh trays	• Vario TD The tried-and-tested cleaning and disinfection programme for perfect results whilst protecting materials.
Vario TD Instr 6 mesh trays	• Vario TD The tried-and-tested cleaning and disinfection programme for perfect results whilst protecting materials.
Vario TD Instr 8 mesh trays	• Vario TD The tried-and-tested cleaning and disinfection programme for perfect results whilst protecting materials.
Vario TD AN	• Vario TD The tried-and-tested cleaning and disinfection programme for perfect results whilst protecting materials.
Vario TD MIS	• Vario TD The tried-and-tested cleaning and disinfection programme for perfect results whilst protecting materials.
Vario TD GYN	• Vario TD The tried-and-tested cleaning and disinfection programme for perfect results whilst protecting materials.
Vario TD ENT	• Vario TD The tried-and-tested cleaning and disinfection programme for perfect results whilst protecting materials.
Vario TD ENT +	• Vario TD The tried-and-tested cleaning and disinfection programme for perfect results whilst protecting materials.
Vario TD ENT Optics	• Vario TD The tried-and-tested cleaning and disinfection programme for perfect results whilst protecting materials.
Special 93 °C–10'	•
Ophthalmology	•
Ophtha tray A 207	•
Baby bottles	•
Theatre shoes	•
Ward utensils	•
Universal	•
Features
1 door dispenser for rinsing agent	•
1 dispenser pump for liquid cleaning agent	• Integrated dispenser pump Integrated dispenser pumps facilitate the quick and precise dosing of liquid media.
1 dispenser pump for neutralising agent	• Integrated dispenser pump Integrated dispenser pumps facilitate the quick and precise dosing of liquid media.
Additional integrated dispenser pumps (optional)	• Additional integrable dispenser pumps For applications that require additional media, additional dispenser pumps can be integrated into the machine.
Volume flow control	•
Steam condenser	•
Spray pressure monitoring	• Spray arm pressure monitoring The wash pressure is monitored for perfect cleaning results.
Spray arm monitoring	• Spray arm monitoring Reliable cleaning performance thanks to the monitoring of the rotation speed of the spray arm.
Conductivity monitoring	• Conductivity monitoring Reliably clean: Residue-free final rinse for perfect results.
Interface for process documentation (optional)	• Process documentation Safety through the clear documentation of all the reprocessing steps.
Multi-component filter system	•
Variable-speed heater pump	• The heart of perfect results In the individual programmes the speed of the pump and thus the wash pressure is adjusted in line with the relevant requirements – high pressure facilitates the removal of stubborn soiling, whilst low pressure guarantees the complete wetting of all the wash items. As a result, the consumption of water and energy remains particularly low with optimum wash pressure at all times.
Load carrier – direct coupling	•
DryPlus	• DryPlus Efficient hot air drying: Ideal for drying hollow body instruments or narrow-lumened laboratory glassware.
In-door salt container	• Patented in-door salt container Ergonomic convenience: The in-door salt container is particularly easy to fill.
Customer Service optical interface	•
Setting options for process chemicals (3 x 5 l / 2 x 10 l)	• Setting options for media canisters Tidy and clean: setting options for liquid media.
Wash cabinet seamlessly welded using laser technology	• Crevice-free wash cabinet Perfect hygiene through optimised geometry and laser welding.
Heater elements outside wash cabinet	• Heater elements outside the wash cabinet A plus for hygiene: The heating elements are installed outside the wash cabinet.
Wash cabinet made from high-quality stainless steel (1.4301/304)	• Wash cabinet made from high-quality stainless steel. The wash cabinet is made of stainless steel quality 1.4301. The base of the wash cabinet and the inside door panel are qualitatively superior.
Extensive components (option)	• Large selection of accessories Flexible and comprehensive components for optimum cleaning performance and a variety of reprocessing options.
Connection options
RS 232 serial interface (optional)	• RS 232 serial interface The serial interface facilitates the exchange of data with other appliances, e.g. for process documentation.
WiFi via DataDiary (optional)	• WLAN interface The WiFi interface is ideal for wireless local and network-enabled communication (e.g. for the transfer of data for documentation purposes).
Ethernet interface (optional)	• Ethernet interface The Ethernet interface enables cable-supported communication in the local network.
Standards, test certificates and symbols
VDE (electrical safety)	•
IP safety class according to EN 60529: IP 21	•
EN 61010-1	•
EN 61010-2-040	•
RoHS guideline 2011/65/EU	•
EU medical device class IIb	•