Product selection accessories laboratory technology

for the optimum loading of 4 DIN mesh trays.

for holding different utensils.

for the top cover on the machine, 70 cm deep, 90 cm wide.

For dispensing liquid neutral/alkaline media.

For dispensing liquid acid media.

for use with selected series G 78 mobile units in PG 85 machines.

For the optimum loading of up to 98 vials.

for optimum loading of 56 half petri dishes.

for optimum loading of 56 half petri dishes.

For optimum protection against contamination from labels or glass splinters.

For the optimum cleaning of the wash items. Size 4 x 160 mm.

for optimum loading of up to 38 pipettes, connection for hot air drying.

for the optimum loading of modules on 1 - 4 levels.

for the optimum loading of up to 104 pipettes.

for the optimum loading of narrow necked glassware 500 - 1,000 ml.

For interruption-free connection to the printer.

For connection with a second or additional appliance.

for the manual delivery of demineralised water.

For refilling single use resins

For the quick change to a full/partial demineralisation cartridge.

For the optimum cleaning of the wash items.

Height-adjustable for optimum positioning of laboratory glassware on the nozzle.

Height-adjustable for optimum positioning of laboratory glassware on the nozzle.

for the optimum loading of narrow necked glassware.

for the optimum loading of up to 116 pipettes.

for the optimum loading of up to 96 pipettes.

for the optimum loading of narrow necked glassware 100 - 500 ml.

Height adjustable, for the optimum loading of inserts.

for the optimum loading of large volume laboratory glassware.

for the optimum loading of up to 12 large volume laboratory glassware.

with plastic supports, Ø 4 mm, length 160 mm.

with plastic supports, Ø 4 mm, length 180 mm.

For process chemicals and dispenser modules

for the optimum loading of narrow necked glassware.

for the optimum loading of narrow necked glassware on 2 levels.

with plastic supports, nozzle diameter 4 mm, length 90 mm, 1 item 

for A 301/4 and A 301/5 injector modules.

for optimum loading of up to 56 pipettes.

with plastic supports, nozzle diameter 6 mm, length 210 mm, 20 items

with plastic supports, nozzle diameter 4 mm, length 90 mm, 20 items

with 156 unoccupied injector slots for nozzles with Ø 2.5 mm.

with plastic supports, nozzle diameter 4 mm, length 185 mm, 20 items

with 42 unoccupied injector slots.

with plastic supports, nozzle diameter 2.5 mm, length 125 mm, 10 items.

with 20 unoccupied injector slots.

with 121 + 24 unoccupied injector slots.

equipped with 121 APLW 048 injector nozzles and 24 APLW 051 injector nozzles.

with 121 unoccupied injector slots for nozzles with Ø 2.5 mm.

with 56 unoccupied injector slots for nozzles with Ø 2.5 mm.

with 42 unoccupied injector slots for nozzles.

equipped with 32 APLW 051 injector nozzles and 10 APLW 055 injector nozzles.

to raise the machine, 60 cm deep, 60 cm wide.

to raise the machine incl. side unit, 60 cm deep, 90 cm wide.

with 24 unoccupied injector slots for nozzles.

for the optimum cleaning of instruments on 5 levels.

for the optimum cleaning of instruments on 3 levels.

for loading & unloading washer-&disinfectors.

including drip tray and openings for connecting services to PG 8527/28.

for the optimum loading of different inserts and mesh trays.

to raise the machine, 70 cm deep, 90 cm wide.

For the gentle cleaning of delicate items by interrupting the spray jet.

For the gentle cleaning of delicate items by interrupting the spray jet.

For the optimum loading of test tubes up to 12 x 75 mm.

For the optimum loading of test tubes up to 12 x 105 mm.

For the sealing of fittings to load carriers.

For fixing delicate wash items.

For fixing delicate wash items.

for the optimum loading of up to 98 pipettes.

for the optimum cleaning of the dispenser compartment.

for the optimum loading of beakers from 250 to 600 ml.

For the optimum loading of up to 18 beakers.

for optimum loading of 80 test tubes, 16 x 105 mm.

for the optimum loading of narrow necked glassware.

for the optimum loading of narrow necked glassware.

for the optimum loading of narrow necked glassware.

for the optimum loading of narrow necked glassware 100 - 500 ml.

for the optimum loading of narrow necked glassware on 3 levels.

For the regeneration of full demineralisation cartridges

For the manual filling of single use resins.

For two full or partial demineralisation cartridges.

For optimum water preparation.

for the optimum loading of narrow necked glassware.

for the optimum loading of narrow necked glassware 500 - 1,000 ml.

For the simple and convenient changing of demineralisation cartridges.

for the optimum loading of beakers 250 - 600 ml.

with plastic supports, Ø 4 mm, length 140 mm.

with plastic supports, Ø 6 mm, length 220 mm.

with plastic supports, Ø 3 mm, length 90 mm.

for optimum loading of centrifuge tubes, phials or test tubes, for example.

For holding standard DIN mesh trays as well as various inserts.

for optimum loading of laboratory glassware – can be equipped with 8 nozzles.

with plastic supports, nozzle diameter 2.5 mm, length 125 mm, 1 item.

for optimum loading of laboratory glassware on the lowest level.

for optimum loading of large-volume laboratory glassware, 5 and 10 l.

for optimum loading of large-volume laboratory glassware, up to 20 l.

with plastic supports, nozzle diameter 6 mm, length 130 mm, 5 items.

for optimum loading of 3 pipette cartridges.

with plastic supports, nozzle diameter 4 mm, length 90 mm, 10 items

with plastic supports, nozzle diameter 4 mm, length 185 mm, 10 items

with 110 unoccupied injector slots for nozzles with Ø 2.5 mm.

with plastic supports, nozzle diameter 2.5 mm, length 80 mm, 5 items.

for optimum loading of laboratory glassware – can be equipped with 32 nozzles.

for optimum loading of laboratory glassware – can be equipped with 18 nozzles.

with 16 unoccupied injector slots.

with 27 unoccupied injector slots.

with 70 unoccupied injector slots for nozzles with Ø 2.5 mm.

equipped with 42 APLW 052 injector nozzles.

with 20 unoccupied injector slots for nozzles.

For the top cover on the cladding for appliances PG 8527 and PG 8528.

with 16 unoccupied injector slots for nozzles.

For the gentle cleaning of delicate items by interrupting the spray jet.

With level indicator for the automatic dispensing of liquid cleaning agents.

For the optimum loading of pipettes/MIS instruments in injector units.

to increase capacity by two further mesh trays.

for modules on 2 levels.

for loading & unloading washer-&disinfectors.

For the optimum loading of injector modules or inserts.

For fixing delicate wash items.

For the optimum loading of injector modules or inserts.

As cover for wash items in inserts.

For the optimum loading of wide neck flasks, measuring cylinders, etc.

for the optimum loading of beakers up to 250 ml.

for the optimum loading of up to 38 pipettes.

for the optimum loading of up to 116 pipettes.

for cleaning 88 centrifuge tubes, phials or test tubes, for example.

for the optimum loading of narrow necked glassware.

For two full or partial demineralisation cartridges.

For optimum water preparation.

for the optimum loading of narrow necked glassware.

for optimum loading of up to 44 watch glasses.

for optimum loading of up to 105 watch glasses.

for the optimum loading of narrow necked glassware.

for the gentle holding of 5 microtiter plates.

for the optimum loading of different wash items.

for the optimum loading of up to 23 pipettes.

for the optimum loading of narrow necked glassware 100 - 1,000 ml.

Height adjustable, for the optimum loading of inserts.

for the optimum loading of narrow necked glassware 25 - 100 ml.

for holding different utensils.

with plastic supports, Ø 6 mm, length 240 mm.

for the optimum loading of laboratory glassware.

For use with selected series G 78 upper baskets in PG 85 machines.

with plastic supports, nozzle diameter 6 mm, length 130 mm, 1 item. 

with plastic supports, nozzle diameter 2.5 mm, length 80 mm, 1 item.

for A 302/2 and A 302/3 injector modules.

for optimum loading of laboratory glassware on upper levels.

for optimum loading of large-volume laboratory glassware, up to 50 l.

with plastic supports, nozzle diameter 6 mm, length 210 mm, 5 items 

with plastic supports, nozzle diameter 4 mm, length 90 mm, 5 items 

For optimum loading of 2 pipette cartridges.

with plastic supports, nozzle diameter 4 mm, length 185 mm, 5 items

with 84 unoccupied injector slots for nozzles with Ø 2.5 mm.

equipped with 42 APLW 051 injector nozzles

equipped with 32 APLW 051 injector nozzles and 10 APLW 055 injector nozzles

for optimum loading of laboratory glassware – can be equipped with 8 nozzles. 

equipped with 20 APLW 055 injector nozzles

For dispensing liquid neutral/alkaline media.

for the optimum cleaning of instruments on 2 levels.

for cladding the steam condenser incl. service door, for PG 8527/28.

for the optimum loading of different inserts.

For the gentle cleaning of delicate items by interrupting the spray jet.

For the optimum loading of wide neck flasks, measuring cylinders, etc.

For the optimum loading of test tubes up to 12 x 200 mm.

For the top cover on the machine, 70 cm deep, 90 cm wide.

for process documentation, integrated

For use with selected series G 78 load carriers in PG 85 machines.

For fixing delicate wash items.

for the optimum loading of 38 pipettes.

For optimum securing of delicate items.

For the optimum loading of beakers from 600 to 1,000 ml.

for the optimum loading of half petri dishes.

for optimum loading of 210 slides.

for the optimum cleaning of instruments on 4 levels.

for the optimum loading of wide necked Erlenmeyer flasks.

for the optimum loading of centrifuge tubes, phials and test tubes.

Twin-tank water softener for the continuous removal of soft water up to 40 °dH

For built-under versions.

for the optimum loading of 8 solder frames.

for optimum loading of centrifuge tubes, phials and test tubes, for example.

for the optimum loading of beakers up to 250 ml.

Cover for top of machine incl. side unit, 60 cm deep, 90 cm wide.

with plastic supports, Ø 3 mm, length 110 mm.

with plastic supports, Ø 6 mm, length 200 mm.

For process chemicals and dispenser modules

for butyrometers.

For the optimum loading of inserts.

with plastic supports, nozzle diameter 6 mm, length 210 mm, 1 item

with plastic supports, nozzle diameter 4 mm, length 185 mm, 1 item

for A 300/2 and A 300/3 injector modules.

for optimum loading of up to 121 pipettes.

for optimum loading of 2 pipette cartridges.

with plastic supports, nozzle diameter 6 mm, length 210 mm, 10 items 

with plastic supports, nozzle diameter 2.5 mm, length 80 mm, 10 items. 

with plastic supports, nozzle diameter 2.5 mm, length 80 mm, 20 items.

with plastic supports, nozzle diameter 2.5 mm, length 125 mm, 5 items.

with plastic supports, nozzle diameter 2.5 mm, length 125 mm, 20 items. 

with 121 unoccupied injector slots.

equipped with 121 APLW 047 injector nozzles.

with 121 unoccupied injector slots for nozzles with Ø 2.5 mm.

equipped with 121 APLW 047 injector nozzles.

with 110 unoccupied injector slots for nozzles with Ø 2.5 mm.

equipped with 30 APLW 066 injector nozzles and 12 APLW 067 injector nozzles.

equipped with 12 APLW 056 injector nozzles and 12 APLW 052 injector nozzles.

For the simple recording of bar codes for loading and user recognition.

equipped with 20 APLW 056 injector nozzles.

for the optimum loading of instruments on 3 levels.

for loading & unloading washer-&disinfectors.

for automatic recognition of mobile unit/spray arm monitoring

for the optimum loading of different inserts.

to raise the side unit, 60 cm deep, 30 cm wide.

For the optimum loading of test tubes up to 12 x 165 mm.

For the optimum loading of wide neck flasks, measuring cylinders, etc.